MobileRAID MR8UT6G
New Generation 8-Bay 3.5" inch SATA to USB 3.0 / eSATA Hardware RAID (00/50) / Spanning / JBOD
|
|
The MobileRAID MR8UT6G is a 8-bay hardware RAID and JBOD storage tower that utilizes high performance USB 3.0 and eSATA interfaces to provide over 200MB/s in performance. The included USB 3.0 port is backwards compatible with widely available USB 2.0 ports, which is a convenient feature when both USB 3.0 and eSATA connections are unavailable. With built-in RAID 00, RAID 0x2, RAID 50, RAID 5 x2, spanning and JBOD (individual drives access) (eSATA requires port multiplier support for x2 RAID support), the MR8UT6G provides hardware RAID redundancy protection against hard drive failures. The RAID engine is embedded within the enclosure and performed all RAID parity calculation to reduce CPU utilization from the host PC. RAID controller cards are unnecessary. The MR8UT6G is the ultimate RAID storage for all storage needs.
|
- 8 Bay with hot-swappable trays, supporting 3.5" hard drives and 2.5" SSD without additional adapter.
- Hardware RAID, supporting RAID 0, 1, 10, 3, 5, JBOD (eSATA requires port Multiplier support), Clone and hot spare disk.
- Over 200MB/s read and 170MB/s write performance.
- eSATA and USB 3.0 interface.
- Backward compatible with USB 2.0.
- True hardware RAID design within the enclosure, no driver and no additional RAID controller needed.
- New Clone mode (N-way Mirror) - all the hard drives connected will be mirrored. Clone mode is especially useful when users would like to copy data from one hard drive to several hard drives at the same time.
- Supports SATA I / II / III (1.5Gb/s, 3Gb/s and 6Gb/s) hard drives.
- Over 2TB per volume via eSATA and USB on OS that support 2TB and above.
- Automatic insertion / removal detection and rebuild.
- Hardware RAID with standard Interface. No extra drivers required.
- Compact, stylish 8 bay tower design, ultra quiet cooling fan.
Model |
MR8UT6G |
Form Factor |
Compact Tower |
HDD Trays |
8 Hot-Swappable 3.5" / 2.5" |
RAID Level |
RAID 00, RAID 0x2, RAID 50, RAID 5 x2, spanning and JBOD (eSATA Require Port Multiplier) |
Maximum Capacity |
Support latest 20TB Hard drives, 160TB (512E or 512N drives Supported, 4KN is not recommended) |
Auto Rebuilding |
Yes |
Hot-Spare |
Yes |
Host Interface & Transfer Rate |
USB 3.0 (backward compatible with USB 2.0) eSATA (Port Multiplier is required for multiple drives access or multiple volume) |
Drive Interface |
8x SATA 3.0 / 6.0 |
Cooling Fan |
70mm (2.6in) Cooling Fan x2 |
Power Supply |
200W Internal Power Input: 100~240V Auto Switching |
Control Interface |
Hard Drives, Power LED |
Status Indicators |
Hard Drives Fail, Access, Power LED |
Dimension (in) |
7.6 in (W) x 5.3 in (H) x 8.3in (D) |
Weight (lb) |
6 lb (without HDDs) |
Safety Regulations |
CE / FCC |
Limited Warranty |
1 year |
Package Contents |
MR8UT6G Unit (1) Screws (1 set) User Guide (1) Power Cords(1) HDD Trays (8) eSATA Cable (1) USB 3.0 Type-A to Type-B Cable (1) |
| mr8ut6g_detail_manual_20211231.pdf |