AccuRAID KT-464X12RM512S
The KT-464X12RM512S series is a very high density 4U 64 bay rackmount dual controller with 512TB of storage, designed for storage hungry applications, using revolutionary top-loaded design. The unit utilizes advanced 12G SAS interface technology operating as direct attached storage (DAS). 

To reinforce the KT-464X12RM512S’s ability to overcome hardware failure, two redundant and hot-swappable power supplies and cooling fans are available for added safeguard. Internally, the KT-464X12RM512S supports up to RAID 60, with RAID monitoring, RAID notification, automatic failover, and automatic recovery for RAID protection. Build-in expansion port allow additional JBOD unit (AS480X12R) with up to 224 bays. The SES management features provide instant access to the status of the RAID array and the enclosure to reduce downtime for diagnostic.

KT-464X12RM512S​ 4U 64-bay top-loaded high density design provide space saving, allow fewer power outlet, which in term generate less-heat, requires less cooling and saving on energy cost, providing an ideal solution for high capacity storage needs.
  • Features
  • Specifications
<
>
Architecture
  • 4U 64 bay high density storage for high spacing, high energy saving storage rackmount. 
  • Build-in 512TB of SAS Storage (32x 16TB SAS Enterprise Drives)
  • Redundant controller built-in to provide high availability and high performance. 
  • Support both 3.5" and 2.5" form factor hard drives and SSD.
  • SAS / SATA RAID 60 ASIC engine, providing the highest level of data protection.
  • Dual Channel 12G SAS connector per controller, supporting fail-over.
  • Supports SAS JBOD (AS480X12R) expansion.
  • Redundant and hot-swappable power supply and cooling fans.
RAID
  • Supports JBOD, RAID 0, 1, 1E, 0+1, 3, 5, 6, 30, 50, 60 with hot spare and multiple volumes.
  • RAID 6 tolerates multiple drive failures without downtime or data loss, providing the most advanced level of data protection.
  • Supports online array roaming, online RAID level / stripe size migration, and online capacity expansion.
  • Hot swappable drives that support hot spare and automatic hot rebuilding with automatic drive insertion/ removal detection.
  • NVRAM transaction log, and S.M.A.R.T. to improve the RAID system integrity, reliability, and availability.
Management
  • Embedded enclosure management through WEB GUI, LCD control panel, and online RAID management via RS-232 port.
  • Intuitive, yet comprehensive GUI for configuration and monitoring from remote and local locations.
  • Field-upgradeable firmware in flash ROM, redundant RAID controller firmware upgrade via RS-232 and WEB GUI.
 Model
KT-464X12RM512S
 Form Factor
4U Rackmount, Dual Redundant Controllers
 HDD Trays
 64 Hot-Swappable 3.5"
 RAID Level
 0, 1, 10, 3, 5, 6 , 30, 50, 60
Capacity
512TB (32x 16TB SAS Enterprise)
Hard Drives Type
7,200 RPM SAS Enterprise HDD
 Auto Rebuilding
Yes
 Hot-Spare
 RAID 1, 10,  5, 6, 50 and 60
 Host Interface
PCIe 3.0 x8
 Drive Interface
SAS 
 Cooling Fan
 15 cooling fans
 Power Supply
​ 1100W x 2 Redundant Power Supply Modules
 Control Interface
RS232, RJ-45 Ethernet
 Status Indicators
​ LED/ HDD
 Dimension (in)
 7"H x 19"W x 35.4"D
 Weight (lb)
​ 184 (w hard drives)
 Limited Warranty
​ 3 Years