EliteNAS EN208L+BXE
|
The EliteNAS EN208L+BXE Linux series is a comprehensive feature-dense 2U 8-bay NAS rackmount with Intel Dual Core Processor with 2GB DDR-2 ECC memory. The EN208L+BXE is a performance tuned NAS server capable of unlimited clients, with hardware RAID protection, up to 24TB of storage capacity, and dual Gigabit Ethernet. Now with optional expansion upgrade allow expansion up to 7 more addition EliteSTOR SAS Expander JBOD storage, or total of 122 drives, making a total of 366TB total storage in a network sharing or iSCSI environment.
|
Dual Gigabit and RAID Hard Drives Protection
EliteNAS is built with simple setup and maintenance features. Installation wizard for easy implementation, convenience web-based management for local or remote configuration, Dual 10/100/1000 network support for teaming or redundant networking, and hardware RAID support for your date storage make EliteNAS a simple trouble free unit.
Feature Rich Network Storage - Built-in Snapshot, Folder Replication and iSCSI
In comparison to other NAS units in the market, EliteNAS is bundled with many additional advanced features at no additional charge. iSCSI target support for iSCSI applications, iSCSI initiator support for easy future expansion, NAS to NAS folder replication, scheduled or on-demand volume snapshot, and local tape backup support just to name a few.
iSCSI Support for VMware
SAN environment is most suitable for server virtualization, and SAN is mandatory when utilizing VMware Infrastructure 3 advance features. EliteNAS has built-in iSCSI target to fulfill this requirement at a fraction of the cost of Fibre Optics.
Optional NAS to NAS Automatic Active Cluster Mirroring
Active Cluster Mirroring (ACM) is optional features used to bind two EliteNAS servers as one, so the data written to both systems simultaneously. At the same time, automatic fail-over will supported in case of primary system is fail. Clients attached to the primary NAS server can be serviced by the secondary server and will not notice the fail-over process when the secondary EliteNAS takes over to provide high avaliablity redundancy. Supported up to 4 units.
*NEW Optional SAS hard drives support with expansion for storage expansion
The optional upgrade add SAS hard drives supports with SAS expander, allow connect to additonal 7 more SAS expander JBOD (EliteSTOR ES208X+BE, ES316X+B or ES424X+B), or up to 122 total drives for 366TB total stoage. It includes the following feature:
10Gb Ethernet network Interface controller card is supported for 10Gb Networking. With 10 times faster bandwidth compare to 10/100/1000 Gigabit Ethernet, 10Gb network interface controller provide high performance solution when needed. 10GBASE-T, XFP, SFP+ and CX4 connector are avaliable.
Features
EliteNAS is built with simple setup and maintenance features. Installation wizard for easy implementation, convenience web-based management for local or remote configuration, Dual 10/100/1000 network support for teaming or redundant networking, and hardware RAID support for your date storage make EliteNAS a simple trouble free unit.
Feature Rich Network Storage - Built-in Snapshot, Folder Replication and iSCSI
In comparison to other NAS units in the market, EliteNAS is bundled with many additional advanced features at no additional charge. iSCSI target support for iSCSI applications, iSCSI initiator support for easy future expansion, NAS to NAS folder replication, scheduled or on-demand volume snapshot, and local tape backup support just to name a few.
iSCSI Support for VMware
SAN environment is most suitable for server virtualization, and SAN is mandatory when utilizing VMware Infrastructure 3 advance features. EliteNAS has built-in iSCSI target to fulfill this requirement at a fraction of the cost of Fibre Optics.
Optional NAS to NAS Automatic Active Cluster Mirroring
Active Cluster Mirroring (ACM) is optional features used to bind two EliteNAS servers as one, so the data written to both systems simultaneously. At the same time, automatic fail-over will supported in case of primary system is fail. Clients attached to the primary NAS server can be serviced by the secondary server and will not notice the fail-over process when the secondary EliteNAS takes over to provide high avaliablity redundancy. Supported up to 4 units.
*NEW Optional SAS hard drives support with expansion for storage expansion
The optional upgrade add SAS hard drives supports with SAS expander, allow connect to additonal 7 more SAS expander JBOD (EliteSTOR ES208X+BE, ES316X+B or ES424X+B), or up to 122 total drives for 366TB total stoage. It includes the following feature:
- Support SAS or SATA hard drives - Support both high performance SAS hard drives or high capacity, low cost SATA hard drives.
- Hardware RAID support up to 60 - Support latest RAID level, including RAID 0, 1, 3, 5, 6, 10, 30, 50 and 60 for advance data protection in large number of hard drives deployments.
- Expansion up to 366TB - NAS or iSCSI storage can be expand with EliteSTOR ES208X+BE, ES316X+B or ES424X+B with up to 7 units or 122 hard drives.
10Gb Ethernet network Interface controller card is supported for 10Gb Networking. With 10 times faster bandwidth compare to 10/100/1000 Gigabit Ethernet, 10Gb network interface controller provide high performance solution when needed. 10GBASE-T, XFP, SFP+ and CX4 connector are avaliable.
Features
- Operating system specifically design for NAS and iSCSI application.
- Intel Dual Core processor.
- 2GB ECC DDR2 memory; upgradeable to 4GB.
- Supports latest the 3TB SATA II hard drive.
- Hardware RAID 0, 1, 1+0, 5 and 6 with spare.
- Dual Gigabit Ethernet.
- Convenient setup and easy maintenance.
- NAS discovery tools for easy deployment.
- Web GUI configuration interface supporting Internet Explorer and Firefox browsers.
- Informational Event Log for diagnostic.
- Supports local user account.
- Supports Windows Active Directory Service or Primary Domain Server and Workgroup.
- Supports HTTPS/SSL service.
- Storage protection.
- Designed with Linux based Journaling file system (XFS).
- NAS to NAS replication supporting scheduling with multiple versions or full replication with bandwidth control.
- Supports scheduled or on-demand volume snapshot.
- NAS system configuration for backup and restore.
- Supports Local Tape backup, 3rd party backup agent.
- Supports iSCSI.
- Supports iSCSI target and initiator.
- Supports VMware ESX Server or Microsoft Hyper-V Server
- Optional Active Cluster Mirroring for EliteNAS Failover for bare-metal mirroring and failover (up to 4 units)
- Optional SAS hard drives support with expansion
- Add SAS hard drives support. SATA or SAS drives can be supported in the same unit.
- Support RAID level 0, 1, 3, 5, 6, 10, 30, 50 and 60
- Build-in Expansion port allow expansion up to 122 drives or 7 units.
- Optional 10GbE Ethernet controller card for 10GbE network
Model | EN208L+BXE |
Form Factor | 2U Rackmount |
Processor | Intel Dual-Core Processor |
Memory | 2GB DDR 2 ECC Memory; Upgradeable to 4GB |
RAID Level | Hardware RAID 0, 1, 1+0, 5 and 6 RAID with Hot Spare |
Maximum Capacity | 24TB |
Expansion Slot | USB x 2 |
Hot-Swappable | Yes |
Chipset | Intel 3200 |
Network | On-board 2 x 1000/100/10 (Marvell 88E8056) Supports Teaming over 2 ports, 802.3ad, ALB |
Hard Drives | SATA x 8 |
Power Supply | 550W 2+1 Hot-Swappable Redundant |
Status Indicators | Power and Overheat / FAN Fail LEDs HDD Power and Activity LED |
Dimension (in) | 3.5"(H) x 19"(W) x 28"(D) |
Weight (lb) | 42lb |
Certifications & Compliance | FCC, CE, UL, RoHS |
Limited Warranty | 2 Years |
Model |
EN208L+BXE
|
EN208L+BXE4E
|
EN208L+BXE8E | EN208L+BXE16E | EN208L+BXE24E |
OS |
Linux 2.6.xx based 64 bit OS specificaly made for NAS application
|
||||
CPU | Intel Dual Core Processor | ||||
Memory | 2GB DDR 2 ECC Memory, Upgradeable to 4GB | ||||
RAID | Hardware RAID 0, 1, 1+0, 5, 6 | ||||
Expansion Slots |
USB 2.0 x 2 | ||||
HDD Trays | 8 * Hot-Swappable | ||||
Hard Drives |
No HDD Bundle |
500GB RAID SATA HDD * 8 |
1TB RAID SATA HDD * 8 |
2TB RAID SATA HDD * 8 |
3TB RAID SATA HDD * 8 |
Capacity | N/A | 4TB | 8TB | 16TB | 24TB |