spacer.png, 0 kB
Follow us:     
EliteRAID ER104UT+ / ER104UT+B Performance Comparison via USB 2.0 / 3.0 / eSATA

 Model  Host Interfaces  Max Capacity  Drive Bays  RAID Capabilities
 ER104UT+ / ER104UT+B  USB 3.0, eSATA  12TB  4 Bays  0, 1, 10, 3, 5, Clone, JBOD

High Performance via eSATA and USB 3.0
The new generation of EliteRAID ER104UT+B and ER104UT+ are equipped with SuperSpeed USB 3.0 that provides 5Gbps of total bandwidth for instant performance upgrade. SuperSpeed USB 3.0 5Gbps bandwidth increases performance by 10x over USB 2.0, allowing EliteRAID to perform over 200MB/s in read speed using USB 3.0 vsus 20MB/s using USB 2.0. The complimentary Windows TurboHDD software turbo charges the USB 3.0 performance to over 200MB/s in read speed.


Hardware RAID Engines
Hardware RAID engines are embedded to lower the host server/computer's CPU utilization reserved for other tasks, leaving the complex RAID calculations to the dedicated hardware RAID engine embedded on the EliteRAID. Since RAID is included in the hardware of the enclosure, there is no operating system compatibility issues. Windows, MAC and Linux operating systems will see the unit as a single large storage volume with RAID protection against hard drives failures.


RAID Roaming
To increase protection, each RAID configuration is stored in both unit and the RAID controller card. In case of a hard drive and controller failure, RAID configuration is preserved allowing the administrator to move the complete RAID set to another system without loosing RAID configuration and most importantly, the data inside the RAID set.

Advance Software GUI Management Tools

An optional RAID monitoring software provides cruicial real-time information of the system. Real time system and RAID status is also provided in an initutive graphical user interface. Critical alerts such as failed drives or degraded RAID arrays could be send via SMTP e-mail. 

tr5utp_gui1.jpg tr5utp_gui2.jpg

spacer.png, 0 kB
spacer.png, 0 kB
spacer.png, 0 kB