Overview

The RocketRAID 622 is designed to optimize storage performance and redundancy with RAID levels JBDO, 0, 1, 5 and 10 when paired with port multiplier enclosures. Storage connected directly to the RocketRAID 622 data ports delivers the highest performance while external disk enclosures with port multiplier device will enable higher storage capacities. Supported by PC, MAC and Linux operating systems, RocketRAID 622 could be easily integrated into any platform.

Compatible with eSATA or port multiplier devices, such as TowerRAID series.

Features

Hardware Specification

• PCI-Express 2.0 x1 support (backwards-compatible with PCI-Express 1.0).
• Serial ATA III (6.0Gbps) compliant along with speed negotiation Serial ATA II (3Gbps) and Serial ATA I (1.5Gbps).
• Supports RAID 0, 1, 5, 10 and JBOD.

• RAID array roaming.
• Mount/Dismount RAID array.
• Hot key (ctrl-h) boot-up RAID manager via BIOS.
• Verify RAID array feature for bad sectors and parity check.
• Task scheduler.
• Automatic RAID rebuild.
• Automatic drive (insert / removal) detection.
• Hot spare disk.
• Staggered drive spin-up.
• Rebuild priority (low - highest).
• Spin-down idle mode.
• Hot-swap and hot-plug.
• Bad sector repair and re-mapping to reduce dropped drives.
• Multiple RAID array.
• Multiple logical drive.
• 64bit LBA support greater than 2TB per volume.
• Online capacity expansion (OCE) and online RAID level migration (ORLM).

• SMTP for email notification.
• Alarm / Buzzer alerts for drive failure.
• SHI (Storage Health Inspector – Drive analysis from S.M.A.R.T).
• Event log.

• Command line interface (CLI).
• Web browser-base RAID management software.
• API suppot

Specifications

Model	HA-HIG-RR622
Host Interface	PCI-Express 2.0 x1
Controller Interface	Serial ATA III (6.0Gbps), with speed negotiation Serial ATA  II (3Gbps) and Serial ATA I (1.5Gbps)
Connectors	2 eSATA connectors
RAID Level	RAID 0, 1, 5, 10 and JBOD
OS Supports	MAC 10.5 or 10.6, Windows XP, 2003, Vista, 2008,  Windows 7 and Linux